The Linksys extender can be set up using one of three methods: the web-based, WiFi app, or WPS procedures. There are just a few setup steps and a single pre-requirement for the first one, which is the WPS. You must have an existing router that is WPS compliant and able to connect to the new Linksys extender in order to use this method. Since the Linksys extender works with any router, the Linksys re6400 setup requires that your router be able to support it. Regarding its configuration points, you will need to use and hit the router’s and extender’s WPS buttons. Consequently, a link will be established between the two devices.
Additionally, using the networked device’s web browser to access the setup portal is necessary for the web-based setup. Using the Linksys default web/IP address, you can access it. You will then have access to a variety of features and settings on the setup site. On the other hand, the last approach requires you to download and set up the Linksys WiFi app on your iOS or Android smartphone. You may complete the configuration by viewing the same features and options on the app portal. It will also walk you through the setup steps till the procedure is finished.