Anaerobic sealants are widely used for sealing purposes. They are good for locking threaded fasteners and various cylindrical assemblies. But you have to be extra careful with these things to ensure effectiveness and longevity. Here we are going to share some practical tips to help you on storage and handling of these protective coatings and sealants.
Storing at the right location
Anaerobic sealants usually come in tubes. But before you open the product, you must arrange a place where you can store it. Keep it at a place where direct sunlight doesn’t come, and is protected from temperature fluctuations. These sealants need to be consistent in their formation to work properly. Extreme temperature fluctuation, humidity, and sunlight shorten its life.
Keep the cap tightly closed
If you are in the middle of a project, you may forget to reseal your sealant container properly. But if you do that, you may find the sealant has hardened already when you use it again. The tube can evaporate sometimes. It’s because oxygen exposure can start the curing process. So, keep the container tightly closed after use.
Avoid cross contamination
You may be working with multiple types of sealants and protective coatings at work. If that’s the case, then you must consider labeling the containers properly. Imagine using a low strength sealant instead of a high strength one by mistake. This could lead to issues later on. Also, mixing might lead to unpredictable reactions and reduce performance.
Check expiration date
You might think “I’ll just use this tube I found at the back of my drawer.” But it can ruin your project if it’s an expired product. Expired anaerobic sealants lead to subpar results. So, if it’s past its prime, better use a new one.
Mixing and dispensing
You might think you can eyeball the mixing ratio, but precision matters. It is a must to follow instructions from the manufacturer. You have to make sure that the product is properly activated before application.
About ITW Performance Polymers:
ITW Performance Polymers is a global supplier of best epoxy coating for steel, sealants, coatings and similar polymers. The company is trusted by hundreds of businesses working in construction, chemical, electronic and similar industries.
Get in touch to know more about their offerings at https://itwperformancepolymers.com/
Original Source:- https://bit.ly/3OiUhnX
